Showing posts with label 2011. Show all posts
Showing posts with label 2011. Show all posts

Wednesday, January 4, 2012

Perfecting 4184 The Black Pearl

When the first images of this set appeared the response from the AFOL community was largely disappointment bordering on disgust. 


I personally felt, and still feel, that this was unfair.  To Lego's credit, with the parameters they had to operate in, I thought they did a pretty good job.  There is a front deck (unlike the Brickbeard's Bounty) and the rear cabin is enclosed (unlike the Queen Anne's Revenge).  There are three masts and the center one has three sails (unlike any of the older ships).  On top of that you get some exclusive minifigures, if that floats your boat (pun completely intended) or could get it even cheaper if you were willing to pass on them (I bought mine on Bricklink for 40% off sans figs).  Furthermore, if you take into account inflation this set costs the same amount in today's dollars as the original good guy boat: 1989's Caribbean Clipper. 


Put those two side by side and I wager you will begin to think that maybe the Pearl isn't so bad after all!  For the price you pay I think you get an excellent model.  Thank you your honor, I rest my case!

However, if you compare the Pearl to the ship as seen in the movies, or even the Lego video game, even I will admit that it is not at all a faithful recreation.  The cost of the exclusive parts for the minifigures and the pressure to maintain the $100 price point meant something had to give.  Accordingly, movie accuracy was sacrificed. 


So I set out to see if, without adding hull sections, I could make the model more movie accurate. Along the way I added a few details that I think all Lego ships should have and the result was fantastic.  Below are some pictures illustrating what I did. 

I completely redid the back.  I added more windows and changed their color as well as making the entire shape more accurate by cantalevering out the cabin and adding the sloped roof.  The ship in the movie also had decorative supports underneath the windows which I mimicked using minifigure megaphones.


I added a working mechanism for the anchor to the front, extended the deck, added stairs up to the deck and installed hatches to access the hold below which I sealed off. 

The middle section was finalized by adding a walkway from the front to the back which tied into the stairs that came as part of the original model.  You can also see the cantalevered windows in the back and the redone shape of the top deck.

Just like when I modified the Queen Anne's Revenge I also made instructions for how to do these modifications so I will be able to recreate them in the future.  Overall I really liked the improvements and felt that they make a great ship even better.

Monday, December 19, 2011

Back In The Saddle

I apologize for my extended absence.  My lovely wife and I recently added a new future Lego lover to the world in the form of our second daughter.  With the craziness of adjusting to having two kids, trying to carve out time for my wife to recover and moving into a new house my time to blog has been… limited at best and, more realistically, wholly absent.  But I am happy to report that we seem to be finding our groove and I am officially back in the Lego blogging saddle. 

For your viewing pleasure the following is a picture of my two beautiful daughters both of whom I plan on shamelessly indoctrinating into the cult of Lego when they reach an appropriate age.

Monday, November 7, 2011

Resurrecting the Skull's Eye Part 5: Completion


Well it is done; and I could not be more pleased!  A few painted pieces, 4 glorious hours of building and I have a gorgeous Skull's Eye Schooner added to my fleet. 

Ok the big question I know you all are asking is: did he pull it off?  Did he do the project for less than the original MSRP?  I am happy to announce the answer is yes.  Including shipping the grand total for the project was $116.53 in 2011 dollars.  The really cool part is that if you account for inflation the MSRP for the Skull's Eye today would be in the $190s so I really did get a deal. 

Two quick notes, however, on the cost in case you are considering doing this yourself.  As I mentioned earlier I had about 30% of the parts I needed already and the cost for those pieces is not included in this total (my guess is it would have added about $20 to the project).  Additionally I had extra minifigs lying around that I used as well as all the different parts/alterations I have described.  If you went for pure authenticity (all the correct minifigures and no alternate or modified pieces including the sails) I do not think this would end up being any cheaper than buying a complete model on eBay or Bricklink.  If, however, you are of a similar mind to me and bending the rules of purism does not bother you the Skull's Eye can be yours for much cheaper than any other option.

In addition to the actual model I also took a little bit of creative liberty and added walkways on either side of the cannons creating a cannon well along with a way for figures to traverse from the front to the back of the ship.  This is a feature included on 6285 Black Seas Barracuda and I felt it was sorely lacking on the Skull's Eye. 

In the wake of this success I have decided to up the ante and try to resurrect the remaining 5 ships that I still don't have in my fleet in one fell swoop.  I have already sorted out the parts I have for each one and will make the big purchase when my budget recovers from this project.  Once complete I will have every ship produced by Lego!

For those of you actually interested in trying this I will be posting a detailed walk through of how to make your own Lego sails soon (I am about 50% done with that entry) as well as PDFs of my tracings.

Feel free to email me with any questions.  A few pictures of the final product: 



The green flags are painted.  You would never have known if I had not told you!  You can also see the railing and walkway I added.  

I painted the latticed window and the blue lantern bases.  The Jolly Roger is a sticker applied to a standard panel.

Friday, October 28, 2011

Resurrecting The Skull's Eye Part 4: Making The Sails

As I alluded to earlier if I had needed to buy the sails that would have been a deal breaker for this project. Whether on eBay or Bricklink the price for sails is obscene.  Painful as it is this makes perfect sense as sails are the ultimate exclusive part; each one is unique to its particular set alone.  Some shapes and sizes a shared but the design is particular to each ship.  With such a limited supply the cost is bound to be high. 

On most things I am a purist.  You will not find a single Megablock, Tyco or other cheap imitation piece in my collection.  However, as I mentioned earlier I am not opposed to changing the color of an official Lego piece (and am doing so on this project) and I am also not opposed to creating my own custom parts when I can do it at the same level of quality as Lego.  With the sails and flags I am in a unique position in that I have a fashion designer as a wife which gives me access to some expert knowledge and work as an engineer which gives me access to some fairly high end software, both of which I will put to good use.  I am certain I can make top quality replicas.

My first stop is http://www.classic-pirates.com/ and their excellent library of 1:1 scans of all the Lego sails from every ship Lego has produced.  After downloading those I import them into a computer aided drafting (CAD) program that I use for work.  I then painstakingly trace them down to the smallest detail saving the final product as a PDF.

Screen shot of sail tracing
Ok now for the material.  This is where my wife and her textile training comes in.  What is that mysterious not quite paper but not quite fabric material Lego sails are made of? The answer?   Artist's canvas.  Yes that material is the same stuff as those large canvases you see hanging in museums with all manner of wet media spread across them.  A quick stop at my local hobby shop and I have a pad of artist's canvas with more than enough sheets. 


I insert those sheets into my home printer and must confess that even I am taken aback by the perfection of the result.  Out of the machine come a set of sails indistinguishable from the originals for my soon to be constructed schooner.  Some quick work with my beloved bride's extra sharp scissors and I have a full set of sails for under $8.00!




For those of you interested in trying something like this project yourself I will post, in a later entry, detailed step by step instructions for how to make your own Lego sails from scratch as there are some particulars and pitfalls you should be aware of. 

The parts are here and after a little painting I have before me the final product, I will post final pictures, including the few modifications I did, as well as the final costs in my next entry. 

Thursday, October 20, 2011

Resurrecting the Skull's Eye Part 3: The Bricklink Purchases

I approach buying Legos on Bricklink like generals approach a war.  Making a large purchase (as I am about to do for my Skull's Eye project) is like storming an enemy's  beachhead; poor planning or execution will cost you... Dearly.  Ok so I exaggerate a little bit but the point holds.  With the plethora of stores hawking their plastic studded wares Bricklink can be overwhelming to those looking to pinch pennies as I am.  Here is how I do it. 

My Bricklink purchases are made after hours at work.  No, this is not because I am trying to hide my Lego addiction from an indignant spouse (my wonderful bride is the biggest supporter of my habit God bless her!).  It is because my work computer has 2 screens, and I am going to need them.  I open up no fewer than 8 windows (4 per screen to start) each to the homepage of Bricklink.  I then do a search for the 8 pieces that I think are going to be the most rare. 

Filling the carts
I start with the ones I have labeled as exclusive (as per my earlier blog entry) and then move into the mid-range pieces filling in however many remaining windows I have choosing the parts based on my past experience with their exclusivity. 

These become my 8 starting stores and I then search for my Wanted List in each one of them.  9 times out of 10, if I have done a good job of parsing out the pieces into the 3  categories, this will yield all of the parts I need being in the carts of these various stores.  If not then I find stores that have the missing ones until I have all of the parts accounted for.  Obviously the is a lot of overlap and by the time I have all the pieces accounted for my carts are swelling with repeats.  Thus begins the slashing (and why I want the 2 screens).  Like some sort of perverse reality show I begin eliminating repeats leaving only the most inexpensive offering for a given piece in the cart of it's respective store.  Along with the cold numerical considerations there is also a certain amount of judgement which must be employed at this stage.  Yes a given piece may be cheaper in store A but if that is the only piece that is cheaper and store B has that same piece for a mere few cents more then it is not worth the shipping to buy that single part from store A.  Often whole stores will get eliminated for this reason because even if I can save a couple of bucks on pieces it isn't worth the 7 or 8 dollars I would have to pay in shipping.  Judgement is also needed as it relates to the size of pieces.  Baseplates or other large specialty parts are going to require a larger box for shipment, so packing more small parts (even if they are a bit more expensive) in with the larger ones that are going to have to be shipped in a larger box anyway can potentially save you money somewhere else.  So really my technique is part science and part my gut instinct mixed with past experience. 

When it is all said and done this time around I am left with items in 6 stores and the sense that I have had a mind numbing out of body experience.  Bricklink does not have a lot of automated tools to assist me in my technique, I have to track which pieces are accounted for on my own as there is no online tool that lets you fill your wanted list with the cheapest option across multiple stores (at least not that I have found, if someone knows where this feature is please let me know!).  At the end of one of these crusades (which can take, on a project like this, multiple hours) my head is spinning and I am always wishing I had enough money to just order from the first stores that come to the top of the list.  But I have the parts I need and the supreme satisfaction of feeling like I have won a battle. 

Normally, completing my orders would usher in the time that would find me bouncing around with the anticipation of a child on Christmas Eve waiting for all the parts to come in so I can build the new set.  This time, however, I have a task to occupy my mind and hands: the sails. 

Wednesday, October 12, 2011

Resurrecting the Skull's Eye Part 2: Dealing With The Exclusive Pieces

Alright, I have reached the first major challenge of all resurrection projects: how to deal with the exclusive pieces. 

In terms of figuring out how to deal with exclusive pieces You have the following options:

1. Bite the bullet and pay the arm and a leg it will take to get them (that is going to be rough for me as I am trying to do this for less than the original MSRP and am cheap as it is).
2. Omit them (this sacrifices authenticity but can be a good option if the part is not essential).
3. Substitue another piece (this can be a great option if you are willing to sacrifice authenticity and the piece is "buried" within the set).  
4. Modify a less rare piece (this can be done by modifying the color, creating stickers, etc.).
5. Make your own (this is a great option if you have the skills and equipment on parts like sails and ropes).

In my case I am trying to be as accurate as possible but have already made the decision to go with option 1 on the minifigures and just not get them (I have plenty of extra pirates) so I am not going to be perfectly authentic as it is.  After checking prices on Bricklink and eBay I come to the following conclusions.

On the Hull and the Masts (two exclusive pieces I forgot to mention in my last post) I have no choice but to do option 1 and bite the bullet, there is no way to do this project without them. 

For the Compass I am going to do a combination of option 3 and 4.  My plan is to get get a Round 2 x 2 Tile and create my own sticker which will mimick the look of the compass.  

For the Printed Panel I am going to do option 4 by making a skull and cross bones sticker and applying it to a plain White 4 x 3 Panel.  I will trace the skull and cross bones from a picture of the actual piece so I should be able to make it indistinguishable.   

For the Green Flags and the Blue Palm Tree Pieces I am undecided.  There are some reasonable prices out there for both of these, but all the stores they were in for cheap don't have a lot of the other parts I need which means I will be paying shipping for only a few parts which may prove to be too expensive.  I am going to play this one by ear as I go and either buy them or get each of those parts in a more standard color and paint them (i.e. option 4).   

Finally on the Sails and Ropes I am fortunate enough to have married my amazing wife who coveniently graduated with a degree in textile production management from one of the top fashion schools in the world.  She has assurred me she can help me make perfect replica sails so I will be able to do option 5 on these.  Thank goodness because the price for sails on both Bricklink and eBay is outrageous! 

With those decisions made it is time to start shopping!!!

Monday, October 10, 2011

Ressurecting The Skull's Eye Part 1: Developing The Parts List

A key aspect of any resurrection project is understanding the different categories that a set's parts fall into.  There are three categories which, in my mind, describe each of the pieces in a set. 

The Basic Pieces
The Mid-Range Pieces
The Exclusive Pieces

The basic pieces are those that are common in both type and color.  A prime example of these are bricks and plates, the foundations of any set. 

These will be availible in almost any Bricklink store or lot of loose pieces on eBay.  On a resurrection project they are the parts you won't have to worry about finding or paying an arm and a leg for.   


The mid-range pieces are a little more difficult to find than the basic ones but are still fundamental to the set.  A great example of these types of parts are hinges.  Most Bricklink stores will have hinges, but there are so many differnt types and colors that the exact combination you need is often a bit harder to find and may not exist in a single store.  


The final category is the exclusive parts.  These are the ones that, whether in type, color or both, only came with a few sets and therfore there are less of them floating around.  Due to the limited supply the price for these parts goes up accordingly.  An example from the Skull's Eye is the compass. 
 
My approach to shopping for parts (which I will describe in detail in a later post when I get to that point) is to figure out where I am going to get all the exclusive parts and see how many of the pieces in the other 2 categories I can get from those stores.  Most of the time it is 95% of them or more depending on how many exclusive parts there are.  For now I need to figure out which parts are in which category.   

In the case of the Skull's Eye I identify the following pieces as being exclusive and for the following reasons:

1. The compass shown above (only availible in Pirate themed sets).
2. The printed 4x3 panel on the back of the ship (the piece is common but the printed skull and crossbones is exlusive to this set alone... already dreading the price on that one).
3. The green flags wich cover the cannon ports on the sides (a common piece but very rare in this color).
4. The blue palm tree top pieces that make up the bottom of the lanterns (I only know of one other set that these came with in that blue color: 6271 Imperial Flagship from 1992, my guess is they were included here because they had been overproduced for that earlier set).

Monday, October 3, 2011

It's a Go!

After having looked into it I have determined that trying to ressurrect the Skull's Eye is a reasonable project and am giving the project the green light!  I am in fact a little behind as I have already made the first purchase: the hull.

I knew going into this that the hull was going to be the most expensive part of the project.  Whenever I have a piece (or pieces) like that which are essential and exclusive to the set, I always check both Bricklink and eBay.  In this case it turned out that eBay won.  I found a seller offering the complete hull in excellent condition with free shipping for less than any of the stores on Bricklink.  As the hulls would have added substantially to the shipping cost of any Bricklink purchase this was a no brainer for me.  $35.00 later and I am off and running (or sailing as the case may be)!

The hull from the eBay purchase.
After getting the hull (which along with being essential commmits me to the project) my next stop was Peeron for the set inventory.  This past weekend I went through all of my spare parts to see what I had and develop the shopping list which will guide my decisions on how to get the pieces I need and form the basis of the future Bricklink purchases.  I was pleasantly suprised by how many of the parts I already had.  This is the beauty of some of these older sets, as Lego did not have as large a pool of pieces to draw from they had to make do by using the ones they had in creative ways.  This translates to sets containing a lot more of the basic pieces which are easy to come by.  I was delighted to find that I had about 30% of the pieces already spread throughout my bags and bins of "spare parts". 

With the hull on order and the shopping list in hand I am ready to tackle the next challenge: figuring out how I am going to get the pieces I need.    

Monday, August 29, 2011

Good... But Just Too Expensive

2507 Fire Temple
The Chronicler's Rating - 3/5
Price ~ $120.00
Year Released - 2011


I must confess that I am conflicted in attempting to write a review for this set.  The Fire Temple has a lot to recommend it.  First off, it is unique in that no set like it has ever been produced, I struggle to think of almost anything to compare it to.  The building itself is interesting and has an excellent assortment of pieces in good colors.  Furthermore it has great cross over, it can be the Fire Temple, or a training ground for ninjas, or a home in a China Town district in a city, or the mysterious mountain shrine where the pirate crew finally finds the treasure (or gets eaten by a dragon while trying).  In summary across the board it meets many of the criteria of an excellent set.  So what is my hesitation?  One word: price. 

I am pretty forgiving of Lego’s new pricing.  With the economy being what it is and the shift to more detailed and “collectible” minifigures Lego’s production costs have gone up.  Even with all that though I cannot quite get myself to stomach the price tag on this set.  That hesitation is compounded by the fact that the cost puts it nearly at the same price point as the modular buildings Lego has been releasing in the last few years.  Right now I can get, for a mere $30 more, 10211 Grand Emporium. 


That set, beyond being absolutely breathtaking, is completely built out on all four sides (unlike the Fire Temple which is essentially a façade), has approximately 1000 more pieces and contains a completely finished out interior (unlike the Fire Temple which is, for all practical purposes, empty).  What is the cause of that discrepancy?  The Fire Temple includes a variety of very specialized elements and minifigures which are costly to produce while the Grand Emporium’s parts and figures are far more basic.  The end result is that this set just does not feel like you are getting enough for your money. 

FOR PARENTS
The Ninjago theme is, as I have written about extensively on past set reviews, meant to be both a play set and a game.  With the special spinners and cards which are included in many of the sets (which are now packaged to look more like action figures in many cases) your kids can either play pretend or compete with each other in an actual game.  The Fire Temple is 100% play set so if your kid is primarily interested in the game play aspect of this theme there is no need to fork over the extravagant amount of money it will take to get it.  If, however, playing with the ninjas and acting out stories is their main interest this set, despite its price, will make an excellent addition to their collection. 

FOR KIDS
While this set looks really cool I would recommend that you think long and hard before you spend your money on it.  The first question to consider is: do you like Ninjago for the game aspect or the play aspect?  If your primary interest is in collecting spinners and competing with friends then this set will not do much for you as it includes none of those components.  If the dragon is what appeals to you, the one included with this set is almost exactly the same as the one from the, much cheaper, 2260 Ice Dragon Attack.   


CONCLUSION
If you have read any of my other reviews you know that I will forgive just about anything if a set has good playability.  Unfortunately the playability of this one does not quite get high enough marks to overcome the price tag.  If you really want it, then get it, I don’t think you will be disappointed.  If, however, you are more into the game aspect of Ninjago or are wishy washy about whether or not you really want this one I would avoid. 

Happy Building,
The Lego Chronicler

Tuesday, August 2, 2011

Finally, Another Capital Ship!

7964 Republic Frigate
The Chronicler's Rating - 4/5
Price ~ $120.00
Year Released - 2011


I must confess that I had a good laugh when the first incarnation of this set (7665 Republic Cruiser from 2007) came out, "how many seconds of screen time does that have?  Maybe 10?  And isn't most of that it blowing up?".  But the joke turned out to be on me. 

The original 2007 version
That set was one of the first of what has become a whole pantheon of the, how shall I say it... more obscure Star Wars ships made into Lego form.  Since 2007 that original model has been locked in close competition with such sets as 8096 Palpatine's Shuttle, 8036 Separatist Shuttle, 6205 V-Wing Fighter, 10195 Republic Dropship With AT-OT Walker and many others for the apparently very prestigious title of "set-that-has-the-least-amount-of-screen-time-in-any-of-the-6-movies.  Competition for this title is incredibly fierce.  All joking aside Lego has seriously produced sets of ships that have so little screen time I have never been able to find them in any of the movies. 

Now my more observant readers will be quick to point out that this set, although a reincarnation of 7665, is actually a depiction of that craft as it appears in the Clone Wars TV Series (which I have never watched, I am not that big of a Star Wars fan).  And my observant readers would be right.  In comparison to its predecessor this set benefits from two major improvements: better parts and better colors.  Star Wars has spawned numerous new pieces and between 2006 and now a lot of parts have been created which this set takes advantage of to more realistically depict the graceful curves and shapes of the ship as seen on screen.  I am guessing the TV show also includes a different paint job as this ship is grey as opposed to its predecessor.

FOR PARENTS
The main reason that your kid will probably want this set is the figures as Lego has continued their trend of placing exclusive minifigures in each of the new Star Wars sets (in this case Yoda and 2 other Jedi that I do not recognize).  I personally do not think that exclusive figures alone are reason to get a set (most kids will differ with me on that point, to each their own) but the good news is that in this case the set itself is excellent so it is a win all around although it is a little pricy due to those figures. 

FOR KIDS
An absolutely vital part of any space collection, Star Wars or otherwise, is the capital ship, or if you can manage it, several capital ships.  Yes swooping dogfights pitting your different fighters against one another is fun but sooner or later your stories are going to need to include those fighters in a desperate all out battle against a large, heavily armed and heavily shielded capital ship.  Before Star Wars every subtheme of Space (Ice Planet, Space Police II, Exploriens, UFO, etc.) had a large spaceship so capital ships were fairly easy to get. 

Ice Plant's Deep Freeze Defender
Space Police II's Galactic Mediator
Explorien's Explorien Starship
UFO's Alien Avenger
It is hard to depict the capital ships seen in Star Wars in Lego form due to their size.  The two glorious exceptions have been 6211 Imperial Star Destroyer from 2006, and 8039 Republic Attack Cruiser from 2009 which have both employed the "scale down technique".

2006's Imperial Star Destroyer

2009's Republic Attack Cruiser
 As you can see the chance to get a good Star Wars capital ship has been few and far between.  Although technically not a capital ship in the films or show this set can fill that role in your collection.  For the price this is a great opportunity to get a set that can do that!

CONCLUSION
While not the most prominent or well known ship in the Star Wars universe this set presents the potential buyer with a unique opportunity: to obtain a ship which can legitimately be used as a capital ship in their collection.  With an excellent assortment of pieces in good colors and some exclusive minifigures for those who are into that, this set is an excellent choice that I would highly recommend. 

Happy Building
The Lego Chronicler

Saturday, July 30, 2011

Likely Destined To Collect Dust

7962 Sebulba's and Anakin's Podracers
The Chronicler's Rating - 2/5
Price ~ $90.00
Year Released - 2011


Lego has been producing Star Wars sets for over a decade now.  In that time they have created models of every possible vehicle, no matter how brief its screen time, and multiple incarnations of the most famous (the one notable exception is Queen Amidala's Royal Starship from Episode 1 but that is because Lego does not produce the bricks which would be required in chrome, although it does appear that we will be getting a figure of Queen Amidala in the near future…).  We have had no fewer than 3 releases (and in some cases more) of X-Wings, Millennium Falcons, Snowspeeders, Y-Wings and multiple other craft.  This fact begs the question why, in light of the plethora of every other craft that has a similar amount of screen time, is this only the second incarnation of Sebulba's and Anakin's Podracers ever released?

The Original 1999 Podracing Set
The intrigue is compounded by the fact that these vehicles are from Episode 1 and therefore Lego has had the entirety of the time they have produced Star Wars sets to make multiple models (as opposed to Episodes 2 and 3 which came out afterwards and have therefore had fewer years to be produced, not that that has stopped Lego from creating several incarnations of ships from them anyway) and that it is separated from its predecessor by a decade.  The answer lies in an unfortunate characteristic of all racing sets. 

In my collection I posses the largest Lego racing set ever released: 6395 Victory Lap Raceway from 1988. 


Featuring 4 cars, pits for each of them, a huge grandstand, announcers booth, mechanics truck and more it is the mother load of all race sets from our galaxy or any other.  I got it for my fifth birthday and must confess that despite its size and detail it sat on my Lego table and got played with maybe 2 or 3 times a year.  Why?  Simple: what do you do with a racing set besides... race?  The answer for most kids is nothing and so after the initial excitement and a week of playing race the sets get... boring.  That is what happened with my race track and I would venture that it is what happened with the previous version of this set for a bunch of kids back in the late 90s which is why Lego has waited so long to release another. 

FOR PARENTS
I have written extensively about what makes a great Lego set if you have read some of my other entries you know that I consider the most important quality of any Lego set to be its playability.  Will the set continue to spawn original and creative play a month or even a year after it is first received?  If so then even if it has horrible pieces and is overpriced it is usually worth getting (if it has great pieces and is decently priced then all the better).  The problem with this set is that for most kids it will have very low playability.  With the cost of it being so high and with so many excellent Star Wars sets in a similar price range available at the same time (see 7965 Millennium Falcon) I would recommend that you steer clear of this one unless your child has repeatedly requested it specifically. 

FOR KIDS
I would warn you against this set.  First, as I explained above, race sets such as this can be hard to play with after awhile.  Furthermore the pieces and colors of this set are not that exceptional.  The orange of Sebulba's podracer especially will be difficult to use in your own creations.  If the playability is poor and the pieces not that great there is not a lot to redeem the set.  For this amount of money I would suggest that you look at some of the other Star Wars sets that were released at the same time as this one such as 7965 Millennium Falcon or 7964 Republic Frigate. 

CONCLUSION
This set is a very movie accurate representation of the vehicles from Episode 1. Furthermore, it is exponentially better than its predecessor.  The problem is that sets based on racing can get really boring when it is not possible to actually race the vehicles (case in point the failure of the recent sets based on the movie Speed Racer).  Other than whisking these podracers around the room and acting out a race there is no way for them to compete.  As such I see no reason to think that this set will avoid the fate of primarily being dust collectors which has befallen its many predecessors across multiple themes. 

Happy Building
The Lego Chronicler

Thursday, July 28, 2011

Why Mess With What Works?

7965 Millennium Falcon
The Chronicler's Rating - 5/5
Price ~ $140
Year Released - 2011


It is bar none the most famous ship in the Star Wars universe.  When the Lego Star Wars franchise was launched in 1999 all of us who were collecting Legos knew that it would just be a matter of time before Han Solo's beloved smuggling vessel was produced in Lego form.  The first incarnation was released in 2000 followed by a second version in 2004. 

The Original 2000 Version

The Second Generation 2004 Version
Since that time Lego has released a mid size version and a massive Ultimate Collector's Series model (priced at around $500) but has waited until now to release another "regular size" set of this, in Luke Skywalker's words, "piece of junk".  Fortunately, in the case of this model, Luke would be wrong. 

The Midsized Version

The Ultimate Collector's Series Version
Lego has wisely chosen to not reinvent the wheel with this set.  Though slightly sleeker and more uniform in color, there is very little substantive difference between this set and its 2004 predecessor (the only main difference is that the former had an escape pod which has been exchanged for Han's smuggling compartments in this version).  As the 2004 model achieved a nearly perfect balance of movie accuracy, great pieces, and decent price the fact that Lego has not started from scratch and has instead focused on making a few small but excellent improvements is great news!  The result is the best regular sized model of the Falcon to date. 

FOR PARENTS
If your child is a fan of Star Wars you can rest assisted that they will be asking for this set (or if they are not the asking type, secretly longing for it).  There is no downside to this model, it will not easily fall apart leading to frustration during play, has excellent pieces in very useful colors for when it gets taken apart and will be incredibly fun to play with.  Even the price, though high, is justified by the excellence of the ship and the high piece count.  I would highly recommend this set to you. 

FOR KIDS
No Lego Star Wars collection is complete without a Millennium Falcon.  Lego has waited 7 years since releasing the last version of this ship and they may wait just as long again so I would encourage you to get this set while you can.  Whether you want to re-create scenes from the movie or act out your own original adventures in the Star Wars universe this set will be a great addition to your collection.  If you or an older sibling has either of the previous 2 renditions of this ship then there is no need to get this one also but otherwise get this set!

CONCLUSION
When compared to its predecessors this latest version of the Millennium Falcon rises to the top as the best version yet produced.  No Star Wars collection can be called complete without including the most famous vessel in that universe.  However, the potential buyer can rest assured that in purchasing this set they are not just fulfilling an obligation but are acquiring a truly excellent model in every respect.  I highly recommend this set to all. 

Happy Building
The Lego Chronicler